Newsroom

Industeel will be present at Stainless Steel World Conference and Exhibition from 26 to 28 November 2019, MECC Maastricht, The Netherlands. Please come and visit us on our booth n° C05. Industeel will present several papers at this conference: Wide and thick austenitic stainless steel plates, Nathalie Pauze, Industeel ArcelorMittal, France (PS19010) – Dollar/Yen room – Wednesday […]

The new version of MIL-DTL-32232A from November 2018, superseding MIL-DTL-32332 from 24 July 2009, changed the ballistic test projectile for first article and acceptance testing of < 0.157in (4mm) Ultra-High-Hardness wrought steel armor plate (UHA). After firstly having submitted an important amount of samples to ballistic testing in very thin gauges Mars® 600  to build a […]

Available as bulk solid plate up to 825 mm thickness, XC06 is a soft ferromagnetic iron providing high saturation polarisation, high permeability and low coercitive force with excellent homogeneity.

Industeel has participated to the Third International super-austenitic and Nickel base alloys conference held in Beijing from the 19th -20th November. This conference was organized by the Stainless-Steel Council of China Special Steel Enterprises Association (CSSC) which aims to promote the development and usage of super austenitic stainless steels and nickel-based grades in China. The […]

Following the previous news about this iconic project . The pieces for the elements of the structure and for the roof have been prefabricated in our workshop at Dunkirk. They were cut and bent from plates of 12 m in length and up to 2.5 m in width. The pieces for the structure will be […]

Lean duplex UR™2202 has been selected for the construction of the new work of art called “Oeuvre utile” for the Simone Veil esplanade in Le Creusot, France It was designed by A4 designers and will be constructed by Pyrrhus conception from prefabricated plates from Industeel. The plates have been rolled in our mill in Le […]

Industeel Creusot has just successfully completed on time the final deliveries of clad plates for 100km of linepipe for the Barzan Gas Field project in Middle East.This was made possible thanks to an efficient collective teamwork from all Industeel Teams during the last two years.

Industeel provided technical assistance for the new chimney of the sintering plant at ArcelorMittal Dunkerque and supplied Superduplex UR2507 plates (8 to 30 mm thick) for its fabrication by Peruweld for the fabricator Ferbeck. The 57.5 m high previous chimney was made with double wall insulated Corten steel that showed corrosion after 20 years’ service. […]