Logo ArcelorMittal
Search Close

Newsroom

The history of plated sheets
The idea of ​​combining different steels and alloys in order to take advantage of the best properties of these constituents is not recent. From antiquity, bronzes with different hardnesses were sometimes combined by playing on the casting operation. It was with the Iron Age that blacksmiths understood the interest of coupling grades of steel with different properties, […]
Read the article
Letter to our customers
Esteemed customer, Our economies are progressively coming out of the worst pandemic situation faced in modern times, and if we are not back to a comfortable sanitary situation, our living conditions are noticeably improving. The Economy, as it usually does after a long and difficult crisis, is bouncing back. GDPs all over the world are […]
Read the article
Superplast 200.000T anniversary
Industeel is celebrating 200.000 Tons of Superplast® steel produced for the mould making industry. Superplast steel family is an innovative concept providing enhanced performances compared to old AISI P20 and W1.2738 such as better through-hardness, easier machinability, improved polishability and texturing, repairability by spot welding and increased thermal conductibility to reduce cycle time. We want […]
Read the article
Green steel – Solar panels
Did you know that all steel from Industeel is manufactured from carefully selected recycled scrap? The melting is done with one of our 3 electrical arc furnaces. On the roof of Industeel Belgium we have a large number of solar panels, and we are installing the same solutions on both our French sites. With Industeel […]
Read the article
CREUSABRO® – Webinars Invitation
Invitation from April, 19th to May, 28th 2021 Want to know more about our Creusabro® applications ?  Register for our webinar in English or French Mines & Quarries _ Mobile equipment’s – 1 hour Mines & Quarries_ Fixed equipment’s – 1 hour Cement Plants_ Fixed equipment’s – 1 hour Please contact clarisse.tourneau@arcelormittal.com
Read the article
New WRS Creusabro brochure in arabic !
After English, French, Russian, Spanish, Swedish, Creusabro® Brochure is now available in ARABIC!
Read the article
Presence of Industeel at IDEX 2021
Industeel team invites you to visit us on our booth n° 07-B23 at IDEX 2021 from 21st to 25th February (Abu Dhabi, UAE). We are looking forward to meeting you on our stand!
Read the article
New datasheet for XC06 High Purity Ultra Low Carbon Steel for Magnet applications
Available as bulk solid plate up to 825 mm thickness, XC06 is a soft ferromagnetic iron providing high saturation polarisation, high permeability and low coercitive force with excellent homogeneity.
Read the article
UR™ 2205 duplex plates prefabricated by Industeel Dunkerque for Stockholm New Slussen project.
The construction of the New Slussen is one of the largest urban transformation projects in Sweden. Working in collaboration with the City of Stockholm, the SEK 12 Billion project seeks to create a dynamic urban quarter, responding to its historic context and transforming the city centre. One important function for New Slussen is to reduce […]
Read the article
Industeel participation to the Third International super-austenitic and Nickel base alloys conference (19th -20th Nov. 2020, Beijing)
Industeel has participated to the Third International super-austenitic and Nickel base alloys conference held in Beijing from the 19th -20th November. This conference was organized by the Stainless-Steel Council of China Special Steel Enterprises Association (CSSC) which aims to promote the development and usage of super austenitic stainless steels and nickel-based grades in China. The […]
Read the article
Scroll down to explore
24 - 32 of 45 results

Superplast ® Premium Steel

Published on : 07/10/2019

The « Moulds and Tools » days are organized by the A3TS, the Cercle d’Etudes des Métaux and the IMT Mines Albi-Carmaux every four years since 2007. The purpose is to show the new metallurgical solutions, thermal and surface treatments, or design of molds/tools to provide selecting solutions that are technically and economically optimal for users. The […]
Read the article

Creusabro® Superten

Published on : 01/10/2019

The structural* wear resistant steel What is Creusabro® SUPERTEN ? Water Quenched + tempered wear resistant product, with guaranted hardness, tensile andtoughness values Used for big parts needing structural capacity and exposed to wear in big thicknesses such as demolition shears, thick blades, bucket beam… Thickness 40 mm to 180 mm Mechanical properties / guaranteed […]
Read the article

The Best Paper of ASME PVP2018 (Prague) for the “Material and Fabrication (M&F)” track.

Published on : 24/07/2019

During ASME PVP2019 (Pressure Vessel and Piping division conference) held in San Antonio (Texas, USA) from July 15th to 19th, the paper entitled “Consideration on Tempering and PWHT Temperatures of C-Mn and Low Alloy Steels for the Fabrication of Pressure Vessels: Smart Tuning of Heat Treatment Parameters” was awarded as the Best Paper of ASME PVP2018 (Prague) for […]
Read the article

Fort York bridge in Toronto, first of its kind in Canada made of UR™ 2205 Duplex stainless steel from Industeel.

Published on : 15/07/2019

Industeel supplied 300 tons of UR TM 2205 Duplex stainless steel plates (15 to 35 mm thick) from its mills of Charleroi and Le Creusot with a very stringent surface quality requirement to the steel constructor Mariani Metal Fabricators. This pesdestrian and cycle bridge of Pedelta includes a unique design consisting of two tied Duplex […]
Read the article

MIL-DTL-32332A – First article certification for Mars® 600 in thicknesses 0.098 to 0.157in (2,49 to 3,99mm)

Published on : 10/07/2019

The new version of MIL-DTL-32232A from November 2018, superseding MIL-DTL-32332 from 24 July 2009, changed the ballistic test projectile for first article and acceptance testing of < 0.157in (4mm) Ultra-High-Hardness wrought steel armor plate (UHA). After firstly having submitted an important amount of samples to ballistic testing in very thin gauges Mars® 600  to build […]
Read the article
Renewable Energies

MIL-DTL-32332A – First article certification for Mars® 600 in thicknesses 0.098 to 0.157in (2,49 to 3,99mm)

Published on : 10/07/2019

The new version of MIL-DTL-32232A from November 2018, superseding MIL-DTL-32332 from 24 July 2009, changed the ballistic test projectile for first article and acceptance testing of < 0.157in (4mm) Ultra-High-Hardness wrought steel armor plate (UHA). After firstly having submitted an important amount of samples to ballistic testing in very thin gauges Mars® 600  to build a […]
Read the article

75 th anniversary of the D-Day

Published on : 05/06/2019

A monumental sculpture called « Les Braves » designed by Anilore BANON, is exhibited on Omaha beach since 2004. Created on the occasion of the 60th anniversary of the Normandy landing, « The braves » serves as a significant tribute to the courage of the Allied Forces soldiers who sacrificed their lives for the liberty of  peoples and as […]
Read the article

Creusabro®: wear-resistant steel for the toughest jobs

Published on : 07/04/2019

Creusabro® is a range of advanced wear-resistant steels. Thanks to its unique chemical composition and the manufacturing process used to produce the steel, Creusabro® significantly extends the lifetime of wear parts in critical applications. In a series of real-life tests, Creusabro® has proven it adds value to applications exposed to extremely abrasive conditions and high […]
Read the article
1 2 3 4 5 6

These events may be interesting