Search Close

Newsroom

Industeel awarded « High value proposition partner »
We are very happy and proud to share with you that our valuable customer Godrej Process Equipment has awarded Industeel for being a “HIGH VALUE PROPOSITION PARTNER” during the partners meeting LEAP (LONG, ENRICHING, AGILE PARTNERSHIP) 2024. The event was held in Mumbai, India last 1st of March and our representatives in India (Mr R. […]
Read the article
Industeel’s Relia®400 RRP available at Universal Eisen Und Stahl GmbH
We are pleased to announce that Industeel’s wear resistant steel Relia®400 is now available as XCarb® Recycled and Renewably Produced (RRP) plates at Universal Eisen Und Stahl GmbH. The decarbonization of industry does not stop at renewable energies; resource-saving processes and the use of climate-friendly materials support the transformation of the economy. Universal Eisen und […]
Read the article
Industeel achieves ResponsibleSteel™ Certification for its mills in Charleroi, Le Creusot and Chateauneuf.
Industeel, a global player in stainless, carbon and low alloy specialty steel heavy plates, part of ArcelorMittal, has been successfully certified to be operating at the ResponsibleSteel™ Standard. Committed to maximizing steel’s contribution to a sustainable society, Industeel underwent, over the last 12 months, a rigorous international audit process carried out by accredited auditors from […]
Read the article
Scroll down to explore
56 - 64 of 67 results

Industeel Italia awarded Supplier of the Year

Published on : 23/07/2018

On Friday 12 July, Industeel Italia was awarded Supplier of the Year by the AIPE (Italian Association for Pressure Equipment). This award is assigned to the company supplier of goods or services that has been distinguished by punctual deliveries, quality of the product /service, meeting of customer specifications, and troubleshooting. The AIPE is a non-profit […]
Read the article

Industeel’s UR™347H stainless steel in the world’s largest solar power plant

Published on : 10/04/2018

Industeel has supplied 1,150 tonnes of specialised steel for Noor III, the world’s largest concentrated solar power plant. This plant is being constructed 10km from Ouarzazate, in Morocco. Developed with sustainability in mind, the complex will enable Morocco to source almost half the country’s energy from renewables by 2020. It is estimated that it could […]
Read the article

Industeel UR™2205 duplex stainless steel chosen for chemical transportation tanks

Published on : 23/03/2018

Our UR™2205 duplex steel has been chosen by Van Hool, a major European manufacturer of buses, public transport and industrial vehicles, to build the heads of 270 chemical transportation tanks. Our dimensional capability enables to form 2m diameter heads in a single piece without transversal welding.
Read the article

A record order of clad plates for Industeel

Published on : 20/02/2018

Industeel France has just registered an order of over 50,000 tons of clad plates from EEW, a leading German special pipe producer. The plates will be delivered between February 2018 and November 2019. Clad plate is the combination of a carbon steel base with a layer of stainless steel or nickel alloys. This combination makes […]
Read the article

Great success for the 355 mm continuous slab caster!

Published on : 16/02/2018

The objectives of this project have been achieved. The 18 million euro investment for a new continuous slab caster, inaugurated last year at Industeel Charleroi, now offers the possibility to produce plates up to a unit weight of 20 tonnes with an increase of the maximum thickness up to 175mm for high strength steel and […]
Read the article

New naval construction grade: Industeel®S420G2+Q

Published on : 09/02/2018

Discover the new Industeel®S420G2+Q: a weldable quenched and tempered steel for large offshore structures with excellent toughness and weldability. Industeel®S420G2+Q meets the requirements of NORSOK M-120 Ed.5 datasheet MDS-Y30 Rev.5 and can be delivered at least up to 200mm, above the demands of the standard. Its extremely high thicknesses, available above 100mm, are perfect for […]
Read the article

Industeel’s cryogenic steel in the future Shell petrochemical complex

Published on : 11/12/2017

Industeel will participate in the construction of the new major Shell petrochemical complex located in Pennsylvania, on the shores of Ohio near Pittsburgh by delivering 770 tons of cryogenic plates (9% Nickel). This complex will produce 1.6 million tons of polyethylene per year. Polyethylene is the most widely used polymer in the world. It is […]
Read the article

Thyssenkrupp: new distributor of Superplast® 300

Published on : 07/12/2017

Industeel has recently set up a partnership with thyssenkrupp Materials France for the sale of Superplast® 300 (SP 300) and its sister grade dedicated to mechanical applications (MP33). These easy-to-use grades, specially designed for plastic molding and other mechanical applications, provide better performances than conventional grades (1.2312/1.2738). They prove an excellent through-thickness homogeneity, they are […]
Read the article
1 2 3 4 5 6 7 8

These events may be interesting