Logo ArcelorMittal
Search Close
Scroll down to explore
1 - 0 of 44 results

Letter to our customers

Published on : 09/16/2021

Esteemed customer, Our economies are progressively coming out of the worst pandemic situation faced in modern times, and if we are not back to a comfortable sanitary situation, our living conditions are noticeably improving. The Economy, as it usually does after a long and difficult crisis, is bouncing back. GDPs all over the world are […]
Read the article

Superplast 200.000T anniversary

Published on : 06/16/2021

Industeel is celebrating 200.000 Tons of Superplast® steel produced for the mould making industry. Superplast steel family is an innovative concept providing enhanced performances compared to old AISI P20 and W1.2738 such as better through-hardness, easier machinability, improved polishability and texturing, repairability by spot welding and increased thermal conductibility to reduce cycle time. We want […]
Read the article

Green steel – Solar panels

Published on : 06/10/2021

Did you know that all steel from Industeel is manufactured from carefully selected recycled scrap? The melting is done with one of our 3 electrical arc furnaces. On the roof of Industeel Belgium we have a large number of solar panels, and we are installing the same solutions on both our French sites. With Industeel […]
Read the article

CREUSABRO® – Webinars Invitation

Published on : 05/04/2021

Invitation from April, 19th to May, 28th 2021 Want to know more about our Creusabro® applications ?  Register for our webinar in English or French Mines & Quarries _ Mobile equipment’s – 1 hour Mines & Quarries_ Fixed equipment’s – 1 hour Cement Plants_ Fixed equipment’s – 1 hour Please contact clarisse.tourneau@arcelormittal.com
Read the article

Follow #Creusabro on Linkedin

Published on : 04/07/2021

Our Creusabro Partners are very active on Linkedin, don’t hesitate to follow our #Creusabro to be informed about all news, all applications, all products regarding our wear resistant steels #Creusabro #Industeel #Wearresistantsteels #Creusabropartner
Read the article

Welcome to our universe

Published on : 04/07/2021

It took many months to shoot and especially edit the new film of Industeel. Now it is ready to be unveiled to all the people who will be eager to discover it. From October 1st the film is now available on our website via the YouTube platform. 3 key words that symbolize Industeel in the […]
Read the article

Industeel is now an approved source of materials for Dow Chemical projects

Published on : 04/07/2021

Industeel has officially been added to the last revision of the Dow Chemical plates suppliers list:  G8S-4010-01 – Requirements for Fabricator’s Purchase of Materials to be Used in Equipment for Dow Inc. and Subsidiaries, revised May 18, 2020. The approved alloys are: UR™ 304H, UR™ 304L, UR™ 310H, UR™ 316L, UR™ 316Ti, UR™ 2507, UR™ 2205, […]
Read the article

New datasheet for Creusabro M

Published on : 04/07/2021

New datasheet for Creusabro M2020-06-18 What is Creusabro® Manganese ? Creusabro® M is the genuine fine-grained 12-14%Mn austenitic manganese steel (Hadfield steel) hot-rolled plate.12-14% Mn austenitic manganese steel shows an outstanding hardening capacity under stress recognized for a long time. As delivered, Creusabro® M exhibits a moderate hardness of 180 to 240 HB combined with high ductility and […]
Read the article
1 2 3 4 5 6

These events may be interesting