Logo ArcelorMittal
Search Close

Newsroom

Industeel improves the availability of Creusabro® Steels in Spain and Portugal
We are pleased to announce that we reached an agreement with Norsider, S.A. to become official distributors of Creusabro® wear resistant steels for the Spain and Portugal markets. Norsider is about to receive Creusabro® 4800 and Creusabro® 8000 in a wide range of thickness to answer all immediate needs. The distribution network of Creusabro® steels […]
Read the article
Industeel in the wind cutting ceremony for the WTIV « Wind Apex »
Winds of change! Sustainability and circularity: using wind power to make wind turbine installation vessels for future offshore wind parks.Industeel was proud to participate in the steel cutting ceremony for the wind turbine installation vessel (WTIV), “Wind Apex”, organized by Yantai Tiezhongbao Steel Processing Co Ltd in Shandong Province, People’s Republic of China. This WTIV […]
Read the article
Industeel awarded « High value proposition partner »
We are very happy and proud to share with you that our valuable customer Godrej Process Equipment has awarded Industeel for being a “HIGH VALUE PROPOSITION PARTNER” during the partners meeting LEAP (LONG, ENRICHING, AGILE PARTNERSHIP) 2024. The event was held in Mumbai, India last 1st of March and our representatives in India (Mr R. […]
Read the article
Scroll down to explore
40 - 48 of 69 results

Lean Duplex UR™ 2202 prefabrication for a work of art.

Published on : 20/03/2020

Following the previous news about this iconic project . The pieces for the elements of the structure and for the roof have been prefabricated in our workshop at Dunkirk. They were cut and bent from plates of 12 m in length and up to 2.5 m in width. The pieces for the structure will be […]
Read the article

Industeel’s open days in Charleroi, Belgium.

Published on : 09/03/2020

About 2 000 visitors came to the  Industeel’s Open Days in Charleroi. Among them about 600 students enjoyed the visit and all the explanations given by the Industeel’s staff on the steel manufacturing process. The management representative and the organizing committee would like to thank the staff, the supporting people and the visitors who contributed […]
Read the article

Lean Duplex UR™ 2202 for a nice work of art

Published on : 05/02/2020

Lean duplex UR™2202 has been selected for the construction of the new work of art called “Oeuvre utile” for the Simone Veil esplanade in Le Creusot, France It was designed by A4 designers and will be constructed by Pyrrhus conception from prefabricated plates from Industeel. The plates have been rolled in our mill in Le […]
Read the article

Collective success of an ambitious and historical challenge

Published on : 03/01/2020

Industeel Creusot has just successfully completed on time the final deliveries of clad plates for 100km of linepipe for the Barzan Gas Field project in Middle East.This was made possible thanks to an efficient collective teamwork from all Industeel Teams during the last two years.
Read the article

New NORSOK for UR™ 254 and ISO 17782 homologations

Published on : 18/12/2019

Thanks to all the teams who have greatly contributed we are happy to announce that our UR™ 254 grade is now NORSOK certified for thicknesses ranging from 4.76 mm up to 40 mm. UR™ 254 is a 18% Ni, 20% Cr, 6% Mo super austenitic stainless steel grade with 0.2%nitrogen additions, particularly designed to be […]
Read the article

New application for Superduplex UR™2507

Published on : 02/12/2019

Industeel provided technical assistance for the new chimney of the sintering plant at ArcelorMittal Dunkerque and supplied Superduplex UR2507 plates (8 to 30 mm thick) for its fabrication by Peruweld for the fabricator Ferbeck. The 57.5 m high previous chimney was made with double wall insulated Corten steel that showed corrosion after 20 years’ service. […]
Read the article

Stainless steel World Conference and Exhibition.

Published on : 15/11/2019

Industeel will be present at Stainless Steel World Conference and Exhibition from 26 to 28 November 2019, MECC Maastricht, The Netherlands. Please come and visit us on our booth n° C05. Industeel will present several papers at this conference: Wide and thick austenitic stainless steel plates, Nathalie Pauze, Industeel ArcelorMittal, France (PS19010) – Dollar/Yen room – Wednesday […]
Read the article

Steels for Offshore and shipbuilding new brochure

Published on : 04/11/2019

Download the new brochure
Read the article
1 2 3 4 5 6 7 8 9

These events may be interesting