Newsroom

About 2 000 visitors came to the  Industeel’s Open Days in Charleroi. Among them about 600 students enjoyed the visit and all the explanations given by the Industeel’s staff on the steel manufacturing process. The management representative and the organizing committee would like to thank the staff, the supporting people and the visitors who contributed […]

Lean duplex UR™2202 has been selected for the construction of the new work of art called “Oeuvre utile” for the Simone Veil esplanade in Le Creusot, France It was designed by A4 designers and will be constructed by Pyrrhus conception from prefabricated plates from Industeel. The plates have been rolled in our mill in Le […]

Industeel Creusot has just successfully completed on time the final deliveries of clad plates for 100km of linepipe for the Barzan Gas Field project in Middle East.This was made possible thanks to an efficient collective teamwork from all Industeel Teams during the last two years.

Thanks to all the teams who have greatly contributed we are happy to announce that our UR™ 254 grade is now NORSOK certified for thicknesses ranging from 4.76 mm up to 40 mm. UR™ 254 is a 18% Ni, 20% Cr, 6% Mo super austenitic stainless steel grade with 0.2%nitrogen additions, particularly designed to be […]

Industeel provided technical assistance for the new chimney of the sintering plant at ArcelorMittal Dunkerque and supplied Superduplex UR2507 plates (8 to 30 mm thick) for its fabrication by Peruweld for the fabricator Ferbeck. The 57.5 m high previous chimney was made with double wall insulated Corten steel that showed corrosion after 20 years’ service. […]

Industeel will be present at Stainless Steel World Conference and Exhibition from 26 to 28 November 2019, MECC Maastricht, The Netherlands. Please come and visit us on our booth n° C05. Industeel will present several papers at this conference: Wide and thick austenitic stainless steel plates, Nathalie Pauze, Industeel ArcelorMittal, France (PS19010) – Dollar/Yen room – Wednesday […]

Download the new brochure

The « Moulds and Tools » days are organized by the A3TS, the Cercle d’Etudes des Métaux and the IMT Mines Albi-Carmaux every four years since 2007. The purpose is to show the new metallurgical solutions, thermal and surface treatments, or design of molds/tools to provide selecting solutions that are technically and economically optimal for users. The […]