Perforated Mars® 650 – Data

Perforated Mars® 650 perfored: Ultra-High-Hardness perforated armor

Perforated Mars® 650 perforated is a ultra-high-hard (typical 650 HBW) protection steel offering uncompromising ballistic resistance performance, for use as add-on armor.
In the perforated version, holes are evenly distributed within the surface to interact with the diameter of the incoming threat. The use of specific perforation process leads to very good flatness, absence of HAZ and low residual stress.

Standards

INDUSTEEL: Perforated Mars® 650
Perforated Mars® 650 satisfies requirements of following specifications:
• France : NF A36-800 THD5
• USA : MIL-DTL-32332

Chemical composition -Ladle analysis – Max weight %

C S P Si Mn Ni Cr Mo B
.55 ≤ .002 ≤ .010 ≤ 1.00 ≤.7 2.4 ≤ .4 ≤ .5 ≤ .003

Mechanical properties

Hardness
HBW
Guarantees 577
Typical values 650

 

 

 


 

 

 

Perforated Mars® 650 – Data

Download the complete datasheet


Technical data and information are to the best of our knowledge at the time of publication. However, they may be subjected to some slight variations due to our ongoing research programmes. Therefore, we suggest that information be verified at time of enquiry or order. Furthermore, in service, real conditions are specific for each application. The data presented here are for the purpose of description only, and can be considered as guarantees only when written formal approval has been provided by our company. Industeel reserves the right to change its product range at any time without prior notice.