MAP IS LOADING
MIL-DTL-32332A - First article certification for Mars® 600 in thicknesses 0.098 to 0.157in (2,49 to 3,99mm)
The new version of MIL-DTL-32232A from November 2018, superseding MIL-DTL-32332 from 24 July 2009, changed the ballistic test projectile for first article and acceptance testing of < 0.157in (4mm) ...READ MORE
Want to cast an Aluminum part of your brake system integrated into trucks ?
Want to produce any other metal-casted part of your engine ?
Think Isotrop, a single-melt grade with performances close to ESR, combining a low manufacturing cost with outstanding characteristics compared to ESR. Indeed, the chemical analysis and the heat treatment have been optimized to achieve best microstructure and toughness results. These performances have been validated by the North American Die Casting Association (NADCA), where our Isotrop grade has been referenced for many years. With Isotrop, you can get the best price-performance ratio for your die casting applications.
Industeel supplied 300 tons of UR TM 2205 Duplex stainless steel plates (15 to 35 mm thick) from its mills of Charleroi and Le Creusot with a very stringent surface quality requirement to t...