Moulds cores and cavities
Mould components used to produce plastic parts that vary in size, complexity and applications, for all plastic moulding processes such as: injection, compression, blow and rubber moulding.
Producing high quality injection moulds and plastic parts in a cost effective way is a daily challenge for moldmakers, moulders and OEM…
Learn moreMould bases and hot runners
Industeel produces extra wide tool steel plates (2000 x 4000 mm) suitable to cover a large range of applications with outstanding metallurgical quality for reliable in service tool performance.
Industeel offers a wide range of standard steel grades for toolmaking and also special steels such as TENASTEEL® which might enable you to make substantial savings with longer tool life time…
Learn moreCorrosion-resistant moulds
Mould components used when processing chemically aggressive plastics or for humid or corrosive working conditions, for many plastic moulding processes such as extrusion, injection, blow and compression moulding…
Learn moreCold working tools
Industeel produces extra wide tool steel plates (2000 x 4000 mm) suitable to cover a large range of applications with outstanding metallurgical quality for reliable in service tool performance.
Industeel offers a wide range of standard steel grades for toolmaking and also special steels such as TENASTEEL® which might enable you to make substantial savings with longer tool life time…
Learn moreForging dies
Die casting industry is very cautious in the selection of hot work tool steels to manufacture die casting dies.
In the production of long series, die life time is the first requirement, and tool steel quality / properties will always prevails on its cost, which does not mean that there is no need for cost saving in the die manufacture….
Learn morePrehardened steels – Mechanical applications
Industeel produces prehardened steel grades and available in a very large dimensional program (width ~ 78“ – 2 m thickness up to 37.4” – 950 mm).
Forged-rolled plates and blocks can be supplied for critical thick-product applications where specific properties are required throughout the thickness or for stringent ultrasonic testing specifications…
Learn moreNickel based alloys
Super – austenitic
Highly alloyed iron-nickel-chromium stainless steels containing molybdenum have been developped to respond to severe corrosion specifications.
Learn moreAustenitic ferritic duplex
Duplex stainless steels were born and have been actively developed by European companies since 1935. In view of the continuous improvement of their properties and their growing availability, Duplex stainless steels will remain an attractive solution to the future needs of designers and users in mechanical engineering.
Learn moreSpecialties
These grades have been developped by our researchers in close collaboration with our customers to meet their stringent and specific requirements.
Learn moreAustenitic
These are the most popular of the stainless steels because of their ductility, ease of working and good corrosion resistance; they are derived from the 18Cr-8Ni stainless steel Type 304. The other grades are developed to provide special corrosion resistance properties by adding Molybdenum, Chromium and/or decreasing Carbon content (L grades).
Learn moreHeat resistant alloys
Heat resistant alloys have to be strong and resistant to oxidation or other corrosion processes.
These grades are used for many critical components in a wide range of applications including power generation, chemical processing and gas turbine.
Learn moreFerritic martensitic
These grades are characterized by a very low content of nickel (less than 1%). Their low carbon content prevents hardening by heat treatment and induce a better corrosion resistance than martensitic stainless steels.
Learn moreHigh strength (690MPa)
Amstrong® Ultra 690 grades are high yield strength steels for welded and weight – saving structures
Learn moreVery high strength (890MPa)
Amstrong® Ultra 890 is a quenched and tempered steel for structure with higher strength.
Learn moreUltra high strength (960MPa)
Amstrong® Ultra 960 is a quenched and tempered steel for structure with very high strength.
Learn moreExtreme high strength (1100MPa)
Thanks to its minimum yield strength of 1100 MPa, Amstrong® Ultra 1100 enables large weight savings or support higher stresses and thus carry higher payloads.
Learn moreRolled homogeneous armor – Mars® 190
Easy processing (for a wide range of thicknesses), while keeping good and multipurpose ballistic properties for any kind of threat
Learn moreMedium hard armor – Mars® 220
Mars® 220 for 440 HB applications (blast and IED protection, V shape floors, underbelly for heavy tanks…)
Learn moreHigh hard armor – Mars® 240
Mars® 240 for 500H applications (light vehicles structures, trucks, civil applications, add-on armor kits…)
Learn moreUltra high hard armor – Mars® 600
600HB grades for light vehicles structures, add-on armor…
Learn moreUltra high hard armor – Mars® 300
600HB steels for flat kit parts, front layer, MBT protections…
Learn moreUltra high hard armor – Mars® 300 Perforated
Perforated steels for 620HB applications (ventilation grilles, kit parts…)
Learn moreNaval grades
For submarine hulls and surface vessels, ballistic protection is essential and steels with very high mechanical performance (high yield strength) and sufficient workability for cutting, forming and welding are needed.
Learn moreSteels for moderate temperature service
CarElso™ is a family of CMn steels specially designed for the construction of pressure equipment…
Learn moreSteels for sour service
The HIC or SOHIC grades are special high strength normalized or quenched and tempered CMn grades adapted for pressure equipment. These grades are manufactured via the electric arc furnace with desulfurisation, dephosphorisation, ladle refining and vacuum degassing to provide reproducible, clean and homogeneous steel.
Learn moreSteels for high temperature service
CromElso™ is a low-alloyed CrMo steel family specially designed for the construction of pressure equipment …
Learn moreSteels for cryogenic service
The CryElso® family includes a complete range of cryogenic steel grades from 0.5%Ni to 36%Ni steels, designed for the storage and transport of gases from propane to LNG.
Learn moreStructural & construction steels
Many industries use mechanical parts that place heavy demands on the steel used. Depending on the targeted function, the needed special properties may be mechanical strength, weldability, machinability, formability or large size or thickness.
Learn moreForged-rolled plates
Forged-rolled plates can be supplied for critical thick-plate applications
Learn moreWater quenched grades with 400, 450, 500 HB
Relia® is a range of high hardness, conventional low-alloyed martensitic steels, which obtain their hardness through intense water quenching during plate manufacturing.
Learn moreAlloyed grades with excellent TRIP properties
Industeel offers its exclusive and patented range of Creusabro® wear and impact TRIP-aided abrasion resistant steels.
Learn moreRings & tyres
Rings are manufactured according to international standards or customer specifications, in a large range of readily available steel grades (weldable carbon steel, low-alloy steels, alloyed steels for carburizing or nitriding, and stainless steel).
Learn moreFormed pieces
Industeel is fully equipped for the forming and pressing of heavy and extra-heavy plates.
Learn moreSteel plates and profile cut pieces
Industeel can make heavy ingots up to 130 t unit weight in a full range of special steel chemistries. These ingots can then be transformed into high quality extra-heavy plates through a unique combination of forging and rolling to ensure excellent internal plate quality and good dimensional tolerances and surface quality.
Learn moreSpecial ingots
INDUSTEEL produces and sells ingots for open die forging and ring-rolling,as well as casting pieces for hydro-electric & nuclear applications.
Learn moreForged-rolled plates
Forged-rolled plates and blocks can be supplied for critical thick-product applications where specific properties are required throughout the thickness or for stringent ultrasonic testing specifications.
Learn moreClad plate solution for pressure vessels & structural applications
Our clad plates can be used for pressure vessel and for structural applications where combining fabrication procedures and corrosion resistance is of prime importance.
Learn moreClad plate solution for clad pipe applications
Oil and Gas pipelines are exposed to increasingly aggressive environments, in terms of corrosivity, temperature and pressure. Clad pipes made from metallurgical roll bonded clad plate offer the best material solution to these most demanding applications.
Learn moreTailor made clad solutions
Our excellent knowledge of clad plate process smartly challenges the metallurgy, and allows multiple materials combination on unbeaten tracks.
Learn moreHigh strength for Jack-up
SuperElso® 690CR is a 690 MPa (100 ksi) yield strength quenched and tempered steel adapted for legs of offshore jack-up platforms.
Learn moreWelded elements for jack-up rigs
Offshore oil & gas fields are explored using jack-up rigs that must guarantee the highest level of operating safety. The steel making up the structural elements, particularly the legs, must offer exceptional mechanical characteristics, in particular very high yield strength in addition to high toughness at low temperatures and sufficient weldability.
Learn moreMAP IS LOADING
Industeel’s UR™347H stainless steel in the world’s largest solar power plant
Industeel has supplied 1,150 tonnes of specialised steel for Noor III, the world’s largest concentrated solar power plant. This plant is being constructed 10km from Ouarzazate, in Morocco. Developed...
READ MOREDo you want to develop innovative cranes which reach further and lift heavier load? Are you looking for concrete pumps with larger span? Are you interested ...
Come and meet us at Intermat 2018 to discover Relia®, an innovative range ...
Industeel has supplied 1,150 tonnes of specialised steel for Noor III, the world’s largest concentrated solar power plant. This plant is being constructed 10km from Ouarzazate, in Morocco. Developed...